There also is an air delivery system that consists of pipe or hose that is designed to adequately deliver compressed air at the correct flow rate and pressure to the plasma cutting system. The ...

Modern machines tend to use compressed air. If you already have a compressor you would like to use with your plasma cutter, you’ll need to check both PSI (pressure in pounds per square inch, and ...

At 12-inch/min that is a 15-second cut. A 25-amp machine will need about 31/2 cfm at 60 to 80 psi. Even if you have a small air compressor, you probably have enough air in your tank to get the job ...

Hobart's new AirForce 250ci is a plug-and-use plasma cutter, and it features an internal compressor so it's not necessary to hook up to an external air source.

The Tomahawk 375 Air plasma cutting system line can be used anywhere 208- or 230-volt, single-phase, 60-Hz power is available. Produces 10- to 25-amp output and is rated at 25 amps at 90 volts, 35 ...

Hobart has just released two new portable air plasma cutters. The AirForce 500i which can cut though a 5/8 inch piece of steel, and the AirForce 700i which will cut though a piece of 7/8 inch ...

A plasma cutting machine doesn't make much sound on its own. The migraine-inducing-hiss you hear in the attached video is compressed air rushing through a small nozzle at the end of the cutting ...

Originally doing things like plasma cutting on ... he can’t run the compressor simultaneously as the cutter didn ... machine and some pressurized air inside to push out the plasma, ...